HP 60 & 901 CARTRIDGES Installation and Troubleshooting

CARTRIDGE INSTALLATION

1. Install cartridge. Press [OK] to dismiss any message pop up.
MESSAGES: ‘Previously used’, ‘Low on Ink’, ‘Refilled’ or ‘Depleted’. Press [OK] to continue.

2. Cartridge Alignment: For best quality, don’t skip the alignment page.
Follow instructions on printer LCD or computer. Press [OK] to start alignment page. Wait until
alignment page completely prints out. Printers with scanners: Please follow next step.

3. Printers with Scanners: Place alignment page face down on scanner then press [OK]. Process is
complete when pop up reads ‘Alignment done’.

CARTRIDGE PROBLEM: Performing Printer Reset
1. Open printer cover or cartridge door. Remove both black and color cartridges.
2. Turn off printer. Unplug power cord on the back of the printer.
3. Use a soft cloth to clean both cartridges and the printer’s electrical contact area.
4. Wait 30 seconds.
5. Plug in power cord and turn printer power on.
6. Reinstall the black and color cartridges.